SONiC Support

The Flock Networks Routing Suite can act as the IP Routing control plane for the SONiC Network Operating System. SONiC uses the forwarding plane manager (FPM) to program fpmsyncd. fpmsyncd then sends the routing updates into the SONiC APPL_DB database.

To program fpmsyncd with IP routes the rib object in the /etc/flockd/flockd.json configuration file requires the fpm object to be defined.

    "rib": {
        "fpm": {
            "tcp_port": 2620

Then check FPM is enabled by using the REST API.

$ flockc rib -d -j | grep fpm_state
"fpm_state": "enabled"

NB: The default IP Routing suite shipped with SONiC will need to be disabled, or it will conflict with the Flock Networks IP Routing Suite.

Debugging SONiC

An overview of the SONiC routing-state interactions is here.

Check the fpmsyncd logs for a successful connection from the Flock Networks IP Routing Suite.

# grep "fpmsyncd Connected" /var/log/messages
2020-08-25T08:44:49.707069+00:00 ad2e7e7845ad supervisord: fpmsyncd Connected!

Check the ASIC's have been programmed

The entries below match this SONiC P4 example.

host1 (Ubuntu, <--> switch1 (SONiC) <--> switch2 (SONiC) <--> host2 (Ubuntu,

Use the SONiC saidump utility to show the programmed ASIC entries. Below are shown the entries used to forward to the remote BGP subnet

switch1$ saidump

# Remote BGP subnet
SAI_OBJECT_TYPE_ROUTE_ENTRY {"dest":"","switch_id":"oid:0x21000000000000","vr":"oid:0x3000000000066"}
    SAI_ROUTE_ENTRY_ATTR_NEXT_HOP_ID : oid:0x400000000009c

# Which uses this nexthop
SAI_OBJECT_TYPE_NEXT_HOP oid:0x400000000009c
    SAI_NEXT_HOP_ATTR_IP                  :
    SAI_NEXT_HOP_ATTR_ROUTER_INTERFACE_ID : oid:0x6000000000095

# Which is out of this interface
    SAI_ROUTER_INTERFACE_ATTR_VLAN_ID           : oid:0x2600000000008f